Automotive Services
Services we offer:
- MACHINE SHOP
- 200 - Drill Broken Bolt - $15+
- 210 - Drill Broken Bolt & Helicoil - $20+
- 205 - Install Helicoil in Existing Hole - $15
- 310 - Disassemble/Visually inspect complete engine - $125
- 320 - Disassemble/Visually inspect short block - $80
- 330 - Disassemble/Visually inspect heads (pair) - $30
- 340 - 4cyl Valve job (2 valves per Cylinder) - $150
- 341 - 4cyl Valve job (4 valves per Cylinder) - $200
- 345 - V6 Valve job (2 valves per Cylinder) - $225
- 346 - V6 Valve job (4 valves per Cylinder) - $275
- 350 - V8 Valve job (2 valves per Cylinder) - $275
- 351 - V8 Valve job (4 valves per Cylinder) - $325
**Includes: disassemble, clean, machine seats, machine valves, set spring heights, reassemble
- 215 - Pressure check 4cyl heads (includes degrease) - $40
- 220 - Pressure check (pair) heads (includes degrease) - $70
- 225 - Resurface 4cyl heads (includes degrease) up to 0.020 - $50
- 226 - Resurface 4cyl heads (includes degrease) on Belt Sander - $25
- 230 - Resurface V6 heads (includes degrease) up to 0.020 - $60
- 231 - Resurface V6 heads (includes degrease) on Belt Sander - $40
- 235 - Resurface V8 heads (includes degrease) up to 0.020 - $75
- 236 - Resurface V8 heads (includes degrease) on Belt Sander - $50
- 240 - Install Guide liners V8 (16) Includes Liners - $135
- 245 - Install solid bronze guides (does not include parts) - $120
- 250 - Install hardened exh seats (does not include parts) - $120
- 255 - CC Combustion Chamber - $20
- 260 - Machine for screw in studs (does not include parts) - $120
- 265 - Machine for seals - $30
- 270 - Machine for O.S. Springs - $30 and up
- 280 - Jet wash block - $40
- 290 - R&R Cam Bearings - $50
- 285 - Resurface V8 block. Up to 0.010 - $120
- 300 - R&R core & Oil Plugs (does not include parts) - $25
- 100 - Cut rotors (Car & Light Truck) - $12 ea
- 105 - Cut rotors (Heavy Truck) - $15+ea
- 110 - Cut drums (Car & Light Truck) - $10ea
- 115 - Cut drums (Heavy Truck) - $15+ea
- 120 - Ball Joint R&R - $15 ea
- 125 - Control Arm Bushings R&R $15ea
- 130 - Std U-Joint - $15ea
- 135 - Injected/Burn Out U-Joint - $20ea
- 140 - Front Axle Joint - $25+
- 150 - Hub Bearing (w/our parts)- $30
- 155 - Hub Bearing (w/customer supplied parts) - $35
- 160 - CV U-Joint - $75+
- 170 - Flat Flywheel - $30
- 175 - Stepped Flywheel - $50
- 180 - Recessed Flywheel - $50
- 185 - Large Flywheel - $50+
- 400 – Misc Shop work
*All prices subject to change per application
- SERVICE
- Accessories
- Lift kits
- Speciality work
- Welding and more
- SPECIAL ORDERS
- PAINT
- Mix factory colors
- Can put in spray cans